Showing posts with label current work. Show all posts
Showing posts with label current work. Show all posts

Monday, February 15, 2010

Amethyst medallion


Here's a new piece; hand-twisted filigree on sterling. The stone is pavilion set in fine silver with a small cut out through the back of the piece to allow light to slip in and give the stone extra flash. I also diamond etched the background for even more sparkle. I like the contrast in shapes, and my favorite part is the teardrop shaped bail.

Thursday, February 11, 2010

Show circuit application time...eww...

Here goes the show circuit application process cycle again... whew - what a mouthful! I've already sent out quite a few apps and have another round coming up.

This year I'm trying something new. I'm applying for more exhibits and fewer out of state shows. The economy's been a little wonky, some large Ohio businesses are still making fresh cuts and laying off employees, and I just don't have a good feeling that things are solid enough yet. I'll bet the rest of the US is experiencing similar issues, too.

Since I'm still young in this medium, my resume is a bit thin, and getting into some exhibits across the country would be good exposure without the cost of travel. I'm also beginning to work with more galleries to create a steadier cash flow. We'll see how it goes!

In the mean time, I've been resting on my laurels a tad. Two weeks ago I participated in a studio clearance sale produced by Ohio Designer Craftsmen, of which I'm a member. I very nearly sold out everything in my booth and was able to pack up in record time since there was so little to pack! A HUGE thank you to all I saw at the show, especially to those new to collecting my work! I have never seen a crowd more ready to buy great art and fine craft at such good prices. Too bad it'll take me another few years to build up excess stock before I can do that show again!

The new photo above is a baby spoon I worked in sterling. It's about 4.5 inches long, and is entirely chased and repoussed by hand. The flowers are a little cascade of forget-me-nots that create a wide textured area for sweet baby hands to grab. Sterling's also a joy for teething tots since the metal stays nice and cool on the gums.

Thursday, January 28, 2010

Green amethyst ring





Here's the latest off my bench, in all different stages - pleased to enjoy!

~Jeni


Wednesday, January 27, 2010

New ring to see



Back on January 11th I posted a picture of a sapphire ring propped up with another ring to take the photo. Here is the process for that ring: a winding vine with hand hammered leaves and a labradorite cabochon. It's been worked off and on for the last couple of weeks in between other projects, and I started to polish it today.


Here are the leaves - hammered and in place next to the vine with solder bits ready for the torch. Next everything is wrapped around the mandrel to form a ring shape.


I like the way the vine undulates and seems to beg for something to
be added for ornamentation where the two ends meet. So, after a few minutes of thought and searching through gemstones, I added a bezel to hold a round labradorite cab, and then set the stone. The blue flash in the stone is a little hard to capture on camera, but I tried! Enjoy the pics. :)


Wednesday, December 30, 2009

Signed, sealed, and delivered!

I'm happy to say the rings are finished, photographed, and on their way to the happy couple! What a relief to make a short deadline with beautiful results, don't you think? I'm looking forward to peaceful sleep now, no more fitful nights working out how I'm going to place this piece of silver or keep this other area from heat damage.

Ahhh... that's a good feeling! As soon as the final photos are sent to me, I'll post them here. Until then, only the bride and groom get to see what they look like. ;)

~Jeni

Monday, December 28, 2009

prongs added, new updates




This project has me jumping! Sue's prongs are on the ring, seats for the diamonds are cut and all leveled. The piercing design is drawn, drilled, and sawn out on her ring. All that's left are the lots and lots of filing, sanding, and polishing stages. Jon's ring is about halfway through all the stages, and both rings will be finished by the end of the day.

My photographer had to postpone until tomorrow, so I was able to spend more time cutting out the piercing design and then use today for polishing. It's better to take my time with it since it adds not only the open feel Sue wanted, but because I really wanted to add to the story of the rings. The piercing creates the third vine on her ring using open space. There's a quote in the Bible that "a cord of three strands is not quickly broken", and each vine on her ring represents one of the cords (which represents the two of them bound together with God in their marriage).

Here are pictures of the prongs on (they won't be cleaned until the final stages) with the vine design being laid out and then pierced. The other photo is of Jon's ring during the rough polishing stage.

Thursday, December 24, 2009

closing the rings



The rings are looking good! The tiny pieces on Jon's ring went on in one pass as well, although it took longer to heat up that much metal. I only struggled with one or two pieces before the flux settled down (even though it's dry it can still bubble up), but they behaved in the end.

Unfortunately, the thickness and width of the metal was more than I accounted for, which affects the ultimate size of the ring, so it didn't reach the right ring size. So, back to the bench to fix the problem, which added about two more hours to my day - but I got it right the second time. :)

Since I was on a roll I started putting the prongs on Sue's ring, which I hope to finish tomorrow. I'm still on schedule, but there is no room for mistakes now. I can't wait to get those diamonds in!

The pics are of Jon's ring first and then Sue's being hammered into shape on the mandrel.

Wednesday, December 23, 2009

ring update





Ok... things are going very well - don't worry Jon; I'm on schedule so far. All of the pieces on Sue's ring soldered very quickly and in one pass. I've never had that happen before, and I work with tiny pieces a lot, especially when I work in filigree. It was beautiful!

I laid out all of the pieces on Jon's ring, and am letting the pieces dry before soldering to prevent the tiny bits from jumping. The flux paste is what makes it look wet in the photos, and once it's dry it looks powdery white. The first photo is Sue's ring before soldering (with bits of solder on it), and the other two are the slow and methodical process of laying out the motif on Jon's ring.

At first I had a thinner silver wire for the his vine (the same size as for Sue's), but the scale made it look too feminine so I beefed it up with an 18 gauge and less curl, which worked perfectly. The leaves are also slightly larger on his, 3-4mm vs. the 2mm leaves on Sue's. I also added extra leaves that are spread throughout the design since there aren't any stones (and it fills the space nicely).

Tomorrow I solder Sue's ring closed, size it properly, and work on getting all the pieces of Jon's design on the ring. Keep watching for updates!

~Jeni